Eryone Thinker S LED Light Bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix from https://www.thingiverse.com/thing:3112141 It supports LED with cut separation of approx. 34mm and…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix from https://www.thingiverse.com/thing:3112141
It supports LED with cut separation of approx. 34mm and 17mm apart, the channel is 10mm wide, there is a space to slide the shields in, they are tight and bit hard to slide in, but they work. Not a lot of space, so you will need cut and solder the leds to make the corners.
Has support for using M3 screws if you want to secure it to the frame, I made custom T-Nut from the OpenSCAD from here: https://www.thingiverse.com/thing:3495698
Please post makes, it's nice to see the makes.
Print Settings
Printer:
Eryone Thinker S
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
20%
Filament:
Mech Solutions PETG
Black\White
Notes:
Should be fine with any material, just choose the PETG to match other printed parts.
Category: 3D Printer Accessories