1 / 1
DIY Nanoleaf — zdjęcie 1

DIY Nanoleaf

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mostly 3D Printable Triangular Nanoleafs without the need for Neopixels. Full instructions can be found on my Instruc...

Ocena
3 / 5
Polubienia
84
Pobrania
355
Wydruki
2
Wyświetlenia
4471
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

For a while now, I’ve been using a strip of LEDs on the back of my desk to add some flare to my otherwise bland room. But over time, this has become a bit old and doesn’t look anywhere as good when the lights are on.

However, I recently stumbled upon this product called Nanoleaf while scrolling through Reddit. But upon checking the price, they seemed more than they were worth. Then I realised: “I have a 3D printer and some LEDs, I can make my own Nanoleaf!”

I printed the bases using Proto-Pasta's Recycled Black PLA (Save the planet) and the lids in their Back-to-Basics White PLA. I experimented with different types of diffusion but I settled on white as I didn't have a roll of transparent PLA. But if you do I would highly recommend playing around with it. Let me know how it went in the comments.

Overall the parts took 30 hours give or take but the most tedious part was that my print bed only fits 3 bases at a time so I had to do the bases in 2 batches. Then I had to repeat the same process with the lids.

Full instructions can be found on my Instructable: https://www.instructables.com/DIY-Nanoleaf-Without-Neopixels/

Tagi