FOKOOS Odin-5 F3 E3D Hemera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket that adapts the FOKOOS carriage to accept a direct drive E3D Hemera.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 674
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This carriage adapter utilizes the stock FOKOOS carriage and requires shaving/grinding the bracket off the front so that the carriage adapter has a flat spot to mount. Assembly is pretty self-explanatory and requires the use of M3 hardware, but I was able to get away with using nuts and bolts from my Hemera kit and FOKOOS extruder without needing to source any additional hardware for a bare-bones installation with no part cooling fan mounted. The PCB off the FOKOOS hot end that the ribbon cable plugs into mounts to the right of the Hemera in a similar location to stock.
This part is by no means perfect and just a functioning proof of concept! Feel free to remix suited to your needs!