Bottle cage mounted case for Topeak Mini Morph/ Mini Morph G bike pumps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts to bottle cage protects the pump from the elements, especially when mounted under the down tube.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 864
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Uses the clip-in mount that is included with the pump and encloses the pump to protect from the elements.
Top and bottom snap together with small clips on either end and there is a slot and recess for a strap to ensure the lid stays put. It has been rattle-free over the course of 500 gravel miles.
Built for the Mini Morph and Mini Morph g pumps, but may work with other Topeak models. The cutout to install the Topeak mount is 24.5mmx83mm.
I printed in PETG with supports on the bottom. Since it is too big to sit straight on a MK3S+ build plate and must be oriented diagonally I recommend a fill angle of 90 degrees instead of the stock 45.