Simplified OneUp EDC V1 tool carrier (with Dynaplug jabber)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Does away with the tire lever and chain breaker on the V1 EDC and just carries the multi-tool and adds a Dynaplug.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 161
- Wydruki
- 1
- Wyświetlenia
- 2158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Slides into the original EDC V1 steer tube system. Swap the o-rings from the original tool carrier and slot the multi-tool into the recess. There is a backstop on one side to rest against the tool and keep it snug.
I hated the tire lever and chain tool on the original and always dropped them when I went for the multi-tool. Over dozens of rough trail rides this tool has remained rattle free, which was definitely not the case for the original.
There is female threading for a standard Dynaplug insertion tube and male threading for they OneUp storage capsule underneath.
Printed in PETG with supports.