Magnetic brake mod for VKB T-Rudder pedals MK.IV
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cheap 3D printed magnetic brake add-on for VKB's T-Rudder pedals.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 2205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
My friend had an idea for a magnet mod for the VKB T-Rudder pedals for helicopter use. Intention was to make this simple, cheap, easy to take off when not needed and to not make any permanent changes to the pedals.
I'm not quite happy with the plateholder yet but this seems to work well enough already.
Jubuttib (the friend mentioned above) also made an instructions video for this:
Parts needed:
- Magnet. 32mm diameter neodymium magnet used in this case.
- Metal plate, I had a 40x120x2,3mm nailing plates at hand and that is a pretty good size for this.
- 2x zip ties, max width 4mm.
STL files are aligned as I've printed them. Magnet holder doesn't need supports but plate holder will.
Fusion 360 file is also available. You should be able to edit it for different size magnets somewhat easily. I messed up the plate position at first and fixed it later which may make editing the slot for it a bit more challenging.
You probably found this from reddit but if you didn't you can join the conversation here https://www.reddit.com/r/HotasDIY/comments/ui48td/magnetic_brake_addon_for_vkb_trudder_mkiv_at/