Formula 1 2022 Car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy to print 3D model of a concept 2022 F1 car
- Ocena
- 0 / 5
- Polubienia
- 202
- Pobrania
- 792
- Wydruki
- 0
- Wyświetlenia
- 12 583
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This 3D model is ideal for all the F1 and motorsport fanatics looking for a fun 3D printing project. The print comes out great when using resolutions like 0.2mm or 0.16mm, although some parts (like the suspension components) require a finer, 0.1mm resolution for a better result. Supports are also recommended at the front wing.
If you also wish to paint the model (I highly recommend so), my advice is to glue all the chassis together, sand it and the other remaining parts as much as possible and use two coats of filler/primer before applying any real paint for best results. I used spray paints and painter tape to create the livery, so feel free to give it your own personal paintjob.
DISCLAIMER: This model was made at the beginning of 2021, thus it is a concept of how the current F1 cars would have looked like, and is therefore not technically accurate in some aspects.