Clock with base 170mm solid LED ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Found the original was too small for my LED ring and the spacing of the segments was off. Used OpenSCAD to create a…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Found the original was too small for my LED ring and the spacing of the segments was off.
Used OpenSCAD to create a new ring suited to the dimensions of mine, removed the segments and then added back to the base. As my ring is solid I needed to make the top ring support into a separate part to be glued on afterwards.
I'm using an ESP32 so flattened the tray out and removed the holes.
Ring Size: 172mm Outer - 163mm inner.
Link to the part from AliExpresss: https://www.aliexpress.com/item/32963238968.html
Category: Office