RICBA Rooster Games Trophy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Rhode Island Children's Book Award presents this trophy you can print right in your own library! After a rousing…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
The Rhode Island Children's Book Award presents this trophy you can print right in your own library!
After a rousing round of Rooster Games, what better way to celebrate than with a nice custom trophy?
Here's a link for the Gold PLA used to create the model you see in the pictures: https://www.amazon.com/gp/product/B06XRPYXP2/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Print Settings
Printer:
Dremel Idea Builder
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
30%
Notes:
Feel free to use a raft if you have a tough time getting prints to stick to your build plate, but it has got a sturdy enough base layer where it should adhere just fine.
Supports shouldn't be necessary, but feel free to use them if you'd like.I used 30% infill to be safe but you could probably get away with going all the way down to 15% to save time/material.
Category: Props