BTT SKR V2 Case/Mount for Prusa Frame (MK2, MK2.5, MK3, MK3S, MK3S+)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for mounting a Big Tree Tech SKR 2 to a Prusa style frame.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 951
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
VERSION 2 OUT NOW: https://www.printables.com/model/244792-btt-skr-v2-casemount-for-prusa-and-bear-frame-v20
Purpose
Allows mounting of a BIGTREETECH SKR 2 onto a Prusa style stock frame. Should in theory also be compatible with the Bear upgrade, however, I do not have one to test this with.
Design
Remixed from: https://www.thingiverse.com/thing:4723441
Changed clamps, clamping method modified, size of hotend wire hole, hole mounting for frame and changed from regular nut for closing the lid to a M3nS type nut.
Design was modified in Fusion 360. Included is a STEP file including a model of the motherboard if you would like to make further modifications.
Features
- Compatible with BTT SKR V2.0.
- Includes all cut-outs necessary for using the unit with no Wi-Fi module. (USB, USB VD, SD).
- Includes Prusa-style hinges for easy access of opening door.
- Includes Prusa-style clamps for heatbed and hotend wires.
- Cut-out for X axis cable.
- Bottom is open.
Requirements
- x5 M3nS Nuts
- x8 M3x10 Bolts
- x1 M3x20 Bolt
Recommended Print Settings
- IMPORTANT: Support required underneath the heatbed cable clamp on base (see photos for example).
- Use PETG or other high temp filament.
- Use 0.2mm SPEED preset in PrusaSlicer.
Important Notes
From my testing a fan to cool the electronics was not required. I have large heatsinks on my TMC2209s and I run the motors at a low current. Please note, I have no idea how well it may preform long term in an enclosure without a fan, so please use here at own risk. I also have a small heatsink on the ARM Processor, not necessary, but I find it helps it keep that much cooler over longer prints.