LINNMON Desk Hard Drive Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is designed to hold my Seagate 1TB external hard drives. They were cluttering up my desk, and I wanted to clear…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is designed to hold my Seagate 1TB external hard drives. They were cluttering up my desk, and I wanted to clear up some space. The hole in the bottom should accommodate any Micro USB 3.0 cable that you want to use.
It might print a tiny bit loose due to contraction after cooling, but if that's the case, you can put a rubber nub or something on the gripper to compensate.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.20mm
Infill:
20%
Filament: 3D Universe PLA Grey
Notes:
I print with the short side down (like an F on the print bed).
Category: Office