1 / 4
Print-in-Place Cannon hatches and Galleon windows
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a play ship for the cats, had to make some 3d printables to complete it!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 438
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Didnt take much to do these and only a couple iterations to make. Made of whatever material i had at the time, slotted into place and was retained to the ship by tiny brass 2.5mm screws.
A timelapse of building the whole ship start to end out of scraps: