MITUTOYO ABSOLUTE HANGING CALIPER HOLDER

NOTE: There is a new universal version here: https://www.thingiverse.com/thing:2860329

TLDR: Download V3 or go to the Universal version linked above.

This is a remix of the holder that @oet made (thank you!). I tried printing his, but I have a different set of calipers and they did not fit.

My calipers are: MITUTOYO 500-196-30 just in case that helps you determine if yours will fit.

So, I added another shelf to the jaws to hold them in place better, I removed some of the profile frame from the bottom that was obstructing my calipers from sitting in the holder, and I added a hanging mount because I will be hanging this in my cubical. I also added my signature to the remix. I left the screw mount holes in case you want to screw it to the wall.

Let me know what you think of it.

I use these Mitutoyo calipers and they are great. They never lose the zero: https://www.amazon.com/Mitutoyo-500-196-30-Advanced-Measuring-Resolution/dp/B00IG46NL2?dchild=1&keywords=mitutoyo+absolute&qid=1623817780&sr=8-1&linkCode=sl1&tag=maltvat-20&linkId=75f038cb19278dae636da97c73b72861&language=en_US&ref_=as_li_ss_tl

UPDATE 5/11/2018:

I uploaded a new version (V3). Some people who used Simplify 3D were having issues with an earlier version because of multiple bodies being in the model. V3 should fix that issue as it is only 1 solid body.

I also changed the jaw shape a bit to facilitate removing and placing the calipers on the jaws. Let me know if you have any suggestions.

Category: Tool Holders & Boxes