Predator Mini Adaptor plate for ImpulseRC Reverb
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaptor Plate for the Predator Mini to move camera forward 5mm to get standoffs out of camera view. Use Brass Blind…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Adaptor Plate for the Predator Mini to move camera forward 5mm to get standoffs out of camera view.
Use Brass Blind Nuts from a similar adapter to fit in rear holes (may need to heat up and press in) I found a soldering iron set around 230 works well for setting the brass knurls into the mount.
You can get M2x3.2x3 knurls in packs of 50 for a few dollars on eBay.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
100%
Notes:
Printed mine in PETG but you may be able to use other materials as well. Also tested in TPU and worked out well.
Category: R/C Vehicles