Liftup Corp Raizer liftchair head support.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is for a head support for a device known as a lift chair. This chair is used to lift people who have…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This design is for a head support for a device known as a lift chair. This chair is used to lift people who have fallen and don't have the strength to stand up. The chair itself was designed by a company known as Liftup in Denmark. The model this was designed for is the older Raizer. The newer model is the Raizer II. I have not tried it, but it may also fit ok on the Raizer II. I made it in 3 sections, so it could be printed on an Ender 3 style printer. I used Gorilla Glue to glue the sections together. The lower back needs to also be screwed to the mid back along the joint with 7 number 4 sheet metal screws, as this a high stress area.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20
Filament: Inland PLA + white
Notes:
walls set to 4
Category: Household
