1 / 12
Voxelab Aquila Shortened Endstop with Pi Cam mount — zdjęcie 1
1 / 12

Voxelab Aquila Shortened Endstop with Pi Cam mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wanted a pi cam mount on the Z axis, similar to the one for the ender 3 https://www.thingiverse.com/thing:2886101 I…

Ocena
0 / 5
Polubienia
3
Pobrania
27
Wydruki
0
Wyświetlenia
315
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I wanted a pi cam mount on the Z axis, similar to the one for the ender 3 https://www.thingiverse.com/thing:2886101

I added grip points to the shortened end stop to allow for the cam mount.

I used a M3x8 bolt to secure the cam mount, but it's quite stable even without the bolt.

UPDATE:

V2 has a better grip by placing the contact points further forward on the endstop. I also tried various lengths and angles for the arm to attach the pi cam. I settled for one that is 10cm longer and angled in at 9 degrees.

Pictures are of the updated endstop and arm.

Print Settings

Printer:

Voxelab Aquila

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20%

Filament:

Hatchbox PLA

BlackHow I Designed This===================

Category: 3D Printer Accessories

Tagi