Handle for Stan's NoTubes valve core remover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I often use the Stan's NoTubes valve core remover with tubeless setups. I rarely use the Schrader side, and wanted a…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I often use the Stan's NoTubes valve core remover with tubeless setups. I rarely use the Schrader side, and wanted a larger handle to use with the remover, so I created this small handle which presses on and covers up the Schrader end. I find it makes the tool nicer to use, but I do have a backup just in case I do need to remove a Schrader valve core.
Print Settings
Printer:
Prusa MK3S
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Filament:
eSun PETG
clear
Notes:
Doesn't need any supports. You can increase wall thickness but it really doesn't need to be all that strong as you shouldn't be tightening valve cores past finger tight.
Category: Hand Tools