Abrasive pipe reamer for round tubing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Abrasive pipe reamer for use with round tubes, especially carbon fiber. Works for diameters of tubing found on…
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 157
- Wydruki
- 1
- Wyświetlenia
- 1111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Abrasive pipe reamer for use with round tubes, especially carbon fiber. Works for diameters of tubing found on bicycles (appx 15-40mm) to create a 45 degree chamfer.
Print the three pieces, use the templates to mark your sandpaper, (I used 220 grit) cut it out and glue the paper into place. I used rubber cement on both the holder and the sandpaper, gave it a moment to dry and stuck them together. Adhesive-backed sandpaper is another option, provided it's not too rigid.
Will print fine on any printer at any settings, but dimensions are set for a Prusa MK3S sliced at 0.3mm layer height with 3 shells for maximum print speed.
Category: Hand Tools