1 / 8
Extreme Bridging Test Pieces (50 mm - 350 mm) — zdjęcie 1
1 / 8

Extreme Bridging Test Pieces (50 mm - 350 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Longer bridging test pieces to test out the limits of your machine. Dialing in just the right bridging settings can…

Ocena
5 / 5
Polubienia
1
Pobrania
534
Wydruki
1
Wyświetlenia
1456
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution

Longer bridging test pieces to test out the limits of your machine. Dialing in just the right bridging settings can reduce the need for support structures in 3D prints and thus reduce print time and material use. Keep in mind that the surface quality and structural integrity of the bridged perimeters and infill lines will decrease the further you go, and just because you can print 300mm bridges without supports, doesn't mean you should.

Hit me up if you need test pieces in other dimensions, 350mm was the longest one fitting on the bed of my CR-10.

 

Update 17.07.2023: 150mm test piece is now not just a duplicate of the 100mm one

Print Settings

Printer Brand:

Creality

Printer: 

CR-10

Rafts:

No

Supports: 

No

Resolution:

.2 mm

Infill: 

15%

Filament: Sunlu PLA white


 

Notes:

 

The bridges in the picture were printed with 50% fan speed and 60mm/s wall speed on a modified CR-10.

 

 

 

Category: 3D Printing Tests

Tagi