Cable organizer for Nema17 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print cable organizer I designed to fix the cables in a nice looking way after a conversion from a bowden to a…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Easy to print cable organizer I designed to fix the cables in a nice looking way after a conversion from a bowden to a direct drive extruder setup on my CR10. Has holes for cable ties and is pretty sturdy with the right amount of perimeters. I printed mine with 20% infill and 3 perimeters at 0.2mm layer height and it works fine.
If you're printing this for a CR10 or similar I advise to get the off-center version as it gives more clearance to the z-spindle. The center-version may work better for other machines, that's why I added it as well.
You will need M3 nuts and bolts to mount this on your printer.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: Geeetech PLA red
Category: 3D Printer Accessories