Clamp for holding Back drop on Neewer Light stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My son is a photographer and was looking for some clamps in my shop for holding simple back drops on his Light stand.…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
My son is a photographer and was looking for some clamps in my shop for holding simple back drops on his Light stand. Most clamps in my work shop are for wood projects and much larger then what was needed. So I drew something up quick in Fusion that he could put on and take off quickly when not in use. Uses some simple 1/4" bolt with wing nut.
It uses a simple Binder clip at other end. I put a 3mm bolt through the hole but it could be held togethe with just about any type wire if no 3mm bolts are handy.
Category: Camera