Anet ET4 Z axis endstop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
My capacitive sensor that came with my Anet ET4+ was very prone to temperature and humidity changes. I decided to disconnect bed sensor and install simple endstop switch.
It installs on the side profile and accepts generic endstop switches from Aliexpress.
Important: When doing this mod You need to change settings in firmware. I'm running Marlin firmware on it anyway so it wasn't a problem.
Side note: You can melt two inner cylinders and press with pliers to make endstop 'fused' with this part and remove any play.
I'm very happy with this mod, my printer started having very reliable first layers :)
Print Settings
Printer:
Anet ET4 +
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament:
Plast-Spaw PETG
Orange
Category: 3D Printer Parts