Prusa MK3 sidebox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side toolbox that can also be used with the 'anti-vibration' printable feet as a standard square box will only work…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 849
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Side toolbox that can also be used with the 'anti-vibration' printable feet as a standard square box will only work with the standard rubber feet. This design features a small 45 degree angle at the bottom to suit your anti-vibration feet needs. No supports needed due to the printer-friendly 45 degree angle. Obviously you can use the box at both sides of the printer...or just print two for each side.
Link for the great anti-vibration feet: https://www.thingiverse.com/thing:2796596
PS Obviously you need to print the Frame Connector twice. ;-)
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
15% or higher
Filament: Prusament PETG (or PLA) Prusa Orange
Category: 3D Printer Accessories