OmniPost Tool Storage Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OmniPost lathe tool holders are very neat because they index about the post in increments of 15 degrees. Sadly that…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
OmniPost lathe tool holders are very neat because they index about the post in increments of 15 degrees. Sadly that wasn't good enough to keep the company in business in these dark times. Still many shops use them and make their own tool blocks to supplement the store bought ones. Storing the tool blocks gets to be a problem after a while so I dreamed up this thing. Build a rack with 20-20 and slide on as many of these prints as you need. Print with support 'touching buildplate'; that's all that's needed.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
100
Filament: Hatchbox PLA Any
Notes:
I used Polyflex TPU, with tree supports with the camera mount printed on its side.
Print Speed of 20mm/s.
Category: Machine Tools