Universal E3D Hemera Part Cooling Duct v2.0 for 5015 Blower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BOM (Book Of Materials): 2x M3 nuts (for the fan) 3x M3x25mm screw 1x M3x6mm screw 3x M3 Washers (for the M3x25 screws…
- Ocena
- 5 / 5
- Polubienia
- 86
- Pobrania
- 1009
- Wydruki
- 4
- Wyświetlenia
- 8872
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
BOM (Book Of Materials):
- 2x M3 nuts (for the fan)
- 3x M3x25mm screw
- 1x M3x6mm screw
- 3x M3 Washers (for the M3x25 screws - optional)
1x 5015 Blower fan
Instructions manual : https://www.thingiverse.com/download:7569024
If you dont know what Hemera is, go check out: https://e3d-online.com/e3d-hemera
If you’ve printed this duct and like it, you can leave your feedback in the comment section or you could upload a photo in the “I made One” section, if none of the above then use the "TIP DESIGNER" button and leave a tip for a hot or cold beverage. You can also use the link: https://www.paypal.me/akoswonerth , if its easier for you. Thank you!
Print instructions
Category: 3D Printer Parts Print Settings
Printer: Geeetech A10 - Hemera
Rafts: Doesn't Matter
Supports: No
Resolution: 0.200
Infill: 25%
Filament: any PLA Cherry-Red