Coaster Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A series of holders for drinks coasters. Intended for my Race Track coasters, but any 90 mm coasters will fit.
- Ocena
- 5 / 5
- Polubienia
- 140
- Pobrania
- 1180
- Wydruki
- 21
- Wyświetlenia
- 4190
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These models are for a drinks coaster holder. Originally designed for my Formula 1 and Racing Circuit coaster series. However, they will fit any 90 mm circular coasters.
The different model C values denote how many coasters it can hold, assuming they are 7-8 mm thick. So, a C5 will hold 5 coasters.
Dimensions
All the coaster holders share the same 91 mm ID and 97 mm OD. The height will depend on the version of the model.
The formula is:(C * 7.2 mm) + 5 mm
Where C is the number of coasters.
So, for the C5 the total height is (5 * 7.2) + 5 = 84.2 mm
Files
I have included 3MF files for the C5, C8, C10, and C11. I included C11 as that ties in nicely with creating two holders for the 22 coasters in the Formula 1 Coaster collection.
Print Settings
Nothing special here. Choose whatever settings you prefer. For my own prints, I chose:
- 0.2 mm layers
- 15% infill in the base
- 0% infill for the walls (you can use the Height Range Modifier in PrusaSlicer for this)
You may want to choose 0.15 mm layers where the rounded parts are at the bottom and top of the slot for a smoother finish.