1 / 3
Arduino Nano DaVinci 1.0 Filament Cartridge Resetter 2 — zdjęcie 1
1 / 3

Arduino Nano DaVinci 1.0 Filament Cartridge Resetter 2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed to eliminate the battery and go back to the pogo pins (the wire-version was very fiddly). Also reduced the…

Ocena
0 / 5
Polubienia
1
Pobrania
57
Wydruki
0
Wyświetlenia
660
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Remixed to eliminate the battery and go back to the pogo pins (the wire-version was very fiddly). Also reduced the width to fit better in a cartridge of mine that was a bit tight, bumped up the height of the inner "rails" so that the Nano sits flat, added polarity indicators to help with wiring, and added some clips to hold the board in. Bonus: It's smaller.

Original Pogo Pins https://www.amazon.com/uxcell-Spherical-Tipped-Spring-Testing/dp/B007Q847I0

Print Settings

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.3mm layer height

Infill:

15%

Category: 3D Printer Accessories

Tagi