1 / 2
60mm Radial Fan Boot Dryer - USB Powered
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a design for a boot dryer which uses 60mm radial fans which are typically 5V powered, and can be used with a…
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 124
- Wydruki
- 2
- Wyświetlenia
- 1591
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (85)Powiązane
This is a design for a boot dryer which uses 60mm radial fans which are typically 5V powered, and can be used with a standard USB power supply. This design was originally designed to work with USB battery banks for drying boots, wet clothing, and other gear while traveling.
Revisions:
Revision 01 - Initial Release - November 28, 2020
Bill of Materials:
- 6X - M3X16mm Flat Head Screws
- 1X - 60mmX10mm Radial Fan
- 2X - M3 Hex Nuts
- 2X - Small Zip Ties (Used for strain relieving)
Print Settings:
- Material - PETG, ABS, or PLA
- Perimeters - 3 (with 0.4mm Nozzle)
- Supports - Not needed
- Infill Percentage - 30%
- Layer Resolution - 0.2mm
Additional Details:
- STEP File has been included so that modifications to the original model can be made easily.
- This was designed in SolidWorks.
- For additional airflow, thicker fans can be used with this design.
Category: Sport & Outdoors