Round Bottom Flask Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand for holding most sizes of round bottom flask similar to a cork stand, and modeled after one. The TPU liner is…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 797
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution
A stand for holding most sizes of round bottom flask similar to a cork stand, and modeled after one. The TPU liner is glued to the PLA base to prevent the flask from sliding around.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select Plus
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.20mm
Infill:
10%
Notes:
The file "ring_stand.stl" was printed with 3DSolutech White PLA, and the file "ring_stand_liner.stl" was printed with Sainsmart Black TPU. No supports were required for either part, as long as both parts were oriented as shown in the pictures.
Post-Printing
The two parts were glued together with superglue, ensuring that the flask wouldn't slide around on the smooth PLA.
How I Designed This
I measured the dimensions of the cork ring stand shown, and re-created it in Fusion 360.
Category: Learning