Finalmouse Air58 Scrollwheel (SLA / DLP Recommended)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First off, this is HIGHLY RECCOMENDED TO BE PRINTED ON A SLA OR DLP PRINTER.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 875
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
First off, this is HIGHLY RECCOMENDED TO BE PRINTED ON A SLA OR DLP PRINTER. See photos, the grey part was printed with a Prusa i3 Mk3S on 0.1mm layer heights. While there is potential with lots of tweaking, the resin part is hands down the winner here.
This part is a one to one exact replica, no changes were made to make it more printer-friendly or lighter.
This part is as close to dimensionally accurate as a $20 pair of calipers can get me.
Print instructions
Category: Electronics Print Settings
Printer Brand: Anycubic
Printer: Photon
Rafts: Yes
Supports: Yes
Resolution: 0.05