Lampi - LED Strip Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lamp that uses standard LED strips attached to a post at the center.
- Ocena
- 5 / 5
- Polubienia
- 207
- Pobrania
- 585
- Wydruki
- 4
- Wyświetlenia
- 4364
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this lamp because the red LED setup I was using to alert my family members that I was in a meeting was deemed too ugly to be on the console table in the entry way.
Besides the circle patterned shade, I also created a blank shade that I intended to be printed as gyroid infill only. I never got around to it, but would love to see a picture if someone else makes it!
I was heavily inspired by Surrbradl08's design on Thingiverse, especially for the central post (https://www.thingiverse.com/thing:3676533).
I printed the base with more walls than I usually would, to try to keep it as opaque as possible. Everything prints without supports, except the shade, which has supports touching the plate only. The top cover was printed with a concentric pattern for the first layer, but not really necessary. The central post and the connector plate are assembled with M3 screws.
I was able to weave my LED strip around the post without cutting the strip and soldering any jumper cables.