Watch Stand with Bottom Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a design I made to hold my small watch collection on.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 734
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a design that I made to hold my watches. I wanted a stand with the support in the middle and a tray at the bottom and came up fruitless. Thus, I made this. It can fit 2 regular-sized watches, one on each side, or more if you don't mind them touching. Both Part 1 (The Base) and Part 2 (The cylinder that the watch sits on) are mandatory. Also attached is a 3mf file of my exact settings.
Consider adding felt to the top for vintage/more delicate watches.
My Print Settings:
Layer Height- .17
Infill- 15% on Octet (for some weight)
Support- Tree support, only touching buildplate, angles are default to Cura (20 deg)
Brim/Raft- Yes, Although not needed.