Earbud shell with support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I love the design of sneakypoo's Earbud holder but I don't like turning on support in my slicer. So I designed a…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
I love the design of sneakypoo's Earbud holder but I don't like turning on support in my slicer.
So I designed a modified version of the shell parts with built-in support flanges that can easily be trimmed off afterwards. This way you can print the shells with nice nubs without turning on support.
Instructions
I printed my prototypes in ABS using 0.25 mm layer height, 0.49 mm extrusion width, 2 perimeters and 50% infill. I used a craft knife to carefully trim off the small triangular support pieces.
Next I want to try and print some PLA copies in some nice bright colours!
Category: Audio