1 / 2
MakerGrid Clip for Aluminum Extrusion T-Slot 20x20 Clips — zdjęcie 1
1 / 2

MakerGrid Clip for Aluminum Extrusion T-Slot 20x20 Clips

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a model for aluminum extrusions with T-Slot. It fits common (B-Type) 20x20 T-Slot profiles.

Ocena
0 / 5
Polubienia
11
Pobrania
90
Wydruki
1
Wyświetlenia
570
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

For building my 3D printer I developed these MakerGrid clips that go directly into the slot of a common 20x20 B-Type aluminum extrusion with a 6mm notch.

There are two models here, one that is “tight fit”, which I recommend if you are printing with PETG. And a “loose fit” variant, which works well for PLA, or if you are over extruding a bit.

I uploaded other MakerGrid parts and a search on printables might reveal even more parts that fit the MakerGrid clip system. See also the base parts: https://www.printables.com/model/123580-makergrid-base-parts

The design of the T-Slot side has been adapted from “2020 cable clips (T-Slot & V-Slot) by Shaun Doe”, and it was licensed under GPLv3.

You can find the source files (Blender model) for this in my Github repository: https://github.com/WeirdConstructor/3DPrining_MakerGrid/tree/master/blender/utils

Tagi