PS4 Controller and Headphone Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for your Playstation controllers and headphones. Parts make it configurable to add more controllers or headphones
- Ocena
- 5 / 5
- Polubienia
- 266
- Pobrania
- 1569
- Wydruki
- 8
- Wyświetlenia
- 9606
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Has a very stable base so can easily go higher to add more Playstation controllers or headphones.
The pole is screwed together using 7cm straight section sections and 2cm stopper sections to hold a stand. Screw parts together while threading on stands above the stoppers.
All parts printed without supports.
Stands were printed on their sides with a brim to help with bed adhesion.
I printed parts with screw threads using 0.15mm layer height.
Stands were printed with 0.2mm layer height.
Base was printed with 30% infill. All other parts has 50% infill.
Update 4 Oct 2022: Added double sided stand so you can hang more controllers! Thanks @Veil Dango