Cupboard Door Pan Lid Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pan lid holder for inside cupboard doors
- Ocena
- 4,867 / 5
- Polubienia
- 611
- Pobrania
- 1470
- Wydruki
- 18
- Wyświetlenia
- 7166
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Convenient and space-saving holders to support pan lids inside a kitchen cupboard door. Attaches with a screw (or double-sided tape if you don't want to drill holes in your cupboard doors).
These have been designed specifically for my Le Creuset lids but should be pretty generic.
Material: PLA/PETG/etc (Print them in the same colour as your cupboard insides for near-invisible effect then paint the screw heads the same colour if you're OCD)
Layer height: 0.3 (for speed)
Infill: 10%
Supports and brim: None
Should take about 19 mins to print 1.
Already oriented in files.
Test fit them first to ensure pan lids will clear door hinges, shelves and whatever's inside the cupboard!
Check that the screws you use will not break out the front of the door!!! I use 4 x 25 mm countersunk screws ('cause I have boxes of 'em).
Regards, Paul