Sting Sword from Lord of the Rings - FDM Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of thing:4441093 which I optimized to be printed on FDM printers. The built-in supports from the original…
- Ocena
- 4,75 / 5
- Polubienia
- 150
- Pobrania
- 785
- Wydruki
- 7
- Wyświetlenia
- 3975
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
A remix of thing:4441093 which I optimized to be printed on FDM printers. The built-in supports from the original which were optimized for SLA printing was removed, and the mesh was slightly optimized to print faster.
I have had good results by printing the parts vertically with tree supports:
- The 'Blade-Tip' can be printed vertically, with a raft, without support
- The 'Balde-Middle' can be printed vertically upside-down, with a raft, and tree support
- The 'Handle-Fixed' can be printed vertically upside-down (The alignment pin touching the build-plate), with a raft, and tree support
At the default size, the completed sword would be around 48CM in length with the handle.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
eSun PLA
Notes:
Print vertically with a Raft andTree Supports for best results while reducing print time and filement usage
Category: Props