SteamVR Lighthouse Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These wall mounts are designed to replace the original wall mounts. The hole spacing is the same as the original.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 547
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A friend asked me for a replacement for his VR Lighthouse mounts, after one of his broke. So I quickly put this together. All you need is an M6 hex screw with a fitting M6 nut and some glue for the ball.
I printed it in high detail (0.1mm with ironing turned on, 0.2mm is probably fine as well) and 5 perimeters to add some extra strength.
The flat plate can be used to stick it to the wall using Tesa Powerstrips or similar double sided adhesives, though it's not really necessary for this mount. It can be found in my other models.