10x10x10mm Calibration Cube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this cube to be 10x10x10mm so that you can adjust your slicer profiles and printer settings to achieve an…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 86
- Wydruki
- 2
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
Designed this cube to be 10x10x10mm so that you can adjust your slicer profiles and printer settings to achieve an accurate print model.
There are other great cube models out there but the majority of them are 20x20x20mm which is great but I don't want to wait 38+ minutes on a 40% infill cube for a calibration.
Depending on your print and slicer settings you can print this out in about 15 minutes @ 150mm/s print speed. This will test your printer's ability to maintain accuracy at higher print speeds.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.12
Infill:
40%
Filament: Your Choice Your Choice Your Choice
Notes:
.4mm nozzle with .26 line width @.12 layer height
Category: 3D Printing Tests