Prusa i3 MK3(S/S+) Y-Belt Idler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom idler mount for the Y-axis / Y-belt with slightly thicker walls, rounded edges and a honeycomb pattern.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 219
- Wydruki
- 4
- Wyświetlenia
- 1070
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This is my take on the Prusa i3 MK3(S/S+) Y-belt idler mount. The walls/sides are slightly thicker, the mounting holes for the nuts and bolts are thicker, there's a hexagon pattern on the sides, and all edges have been rounded.
Mounting the actual idler requires an M3x20mm bolt, due to the thicker sides. However, the nuts from the older model can be repurposed for this design.
Support
If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link: https://s.click.aliexpress.com/e/_oFT8Gq6
Whenever you buy something through this link, I get a small kickback without costs for you ;)
Thanks for your support!