Atari SIO plug with FTDI PCB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made small modification to Atari SIO plug in order to fit in the FT232RL USB to serial board from ebay. The board…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 510
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I made small modification to Atari SIO plug in order to fit in the FT232RL USB to serial board from ebay. The board dimensions are 26x16mm without pin header. In the Atari plug I used 3.96mm pitch contacts (for example). To wire the PCB you must first desolder the pin header and solder jumper to 5V on the bottom side of the PCB. Then connect:
SIO 3 (Data In) -> TXD (through Schottky diode Atari --|>I-- TXD)
SIO 4 (Ground) -> GND
SIO 5 (Data Out) -> RXD
SIO 7 (CMD) -> CTS
The diode can be omitted if you won't use the adapter in SIO daisy-chain.
You may want to use the transparent filament in order to see the RX/TX activity diodes on the PCB.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
Printed on Makerbot Replicator 2 and Original Prusa i3 MK2S from PLA, ABS and PETG.
Category: Computer