Proximity reader spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We had a new access control system installed, and were getting weird "double reads" from one of our doors. Turns out…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
We had a new access control system installed, and were getting weird "double reads" from one of our doors. Turns out that the two readers on that door were too close and it was possible for them both to read cards simultaneously, so I printed these 15mm spacers to provide enough "gap" to stop the double reading.
They are sized for this particular sort of reader, but you could use them as the basis for a more general reader spacer easily enough.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
10% cubic
Filament: Filamentive rPLA White
Category: Office