1 / 3
Flip32+ Top and Bottom Case - Angled Pins — zdjęcie 1
1 / 3

Flip32+ Top and Bottom Case - Angled Pins

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of the case made by Lentech (thx!). Added hole near USB connector for SWD/UART/I2C ports. Modified…

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
63
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

This is a remix of the case made by Lentech (thx!).

  • Added hole near USB connector for SWD/UART/I2C ports.
  • Modified text on top for inset "Flip32+" and an arrow pointing to the front. This allows the Flip to be mounted with the USB port facing to the left side of the Quad. (Requires Yaw change to 90 degrees in Cleanflight).

More cool stuff @ http://www.plastibots.com

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/j6Ogyu0QDLH

Category: 3D Printing

Tagi