dryer vent with grate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got tired of one particular bird repeatedly removing the vanes from the vent cover and building a nest in my dryer.…
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 139
- Wydruki
- 3
- Wyświetlenia
- 728
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I got tired of one particular bird repeatedly removing the vanes from the vent cover and building a nest in my dryer. The main body has a grid pattern that he wont get past.
Work in progress still. I have on the drawing board a version with a pipe pattern to hold the retaining structure in place with tension. I may also be removing some of the extra material around the edges.
Retention ring will be thicker in the Z direction to strengthen the cutouts and lock with the pipe.
The cylinder was an afterthought when i removed the existing cover. it holds on with tension, but would do well with a bead of glue if you need to connect a duct.
145mm box pattern for the mounting screws.
100mm vanes with 10mm posts.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Filament:
generic PETG
Notes:
this version of the retention piece flip over to print so the cutouts are facing up? next update Ill flip it over for the STL export.
Category: Replacement Parts