Cricut Tool holder small
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Taken directly from https://www.thingiverse.com/thing:3037552 (thank you) re-worked to allow printing on a 120 mm…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 546
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Taken directly from https://www.thingiverse.com/thing:3037552 (thank you) re-worked to allow printing on a 120 mm build plate.
The person who requested the tool box wanted an additional deep compartment in front and only needed one cutting tool holder.
Version 2 is only an adjustment to the front compartment. the corner where it meets the back wall is now rounded instead of square.
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
No
Supports:
Yes
Resolution:
fine
Infill:
25
Filament: COLOR ME 3D PLA Purple Haze
Notes:
The filament I used was new to me and didnt act like typical PLA. it was quite cristaline and brittle, the tree supports failed several times. I have several beautiful < 66% prints that couldnt get past printing the tool holder. I eventually had to rotate the model on its back and bridge the overhangs. I found that it printed similar to PETG in that it liked higher temperature.
potential updates will include breakaway supportsCategory: Art Tools