Cute Geocache Bunny
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Cute Bunny- 3D Scan by OpenScan. I hollowed the body, added a threaded plug with groove for an…
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 247
- Wydruki
- 2
- Wyświetlenia
- 1127
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of Cute Bunny- 3D Scan by OpenScan. https://www.thingiverse.com/thing:2778632 I hollowed the body, added a threaded plug with groove for an O-ring and a hole through it's tail to tether it in place. I printed it in PetG to withstand being outdoors. I plan to paint it too. The O-ring material I buy from Amazon. It is .139'' (1/8" Nominal) Buna-N O-Ring Cord Stock, 70A Durometer, 0.139" Thickness, 10' Piece, Black. Here is the link. https://www.amazon.com/gp/product/B00QVB64LQ/ I cut correct length and glue ends with super glue and glue into groove.
Print Settings
Printer:
Sovol SV01
Rafts:
No
Supports:
Yes
Resolution:
0.20
Infill:
15%
Filament:
E-Sun PetG
Translucent Green
Notes:
I used supports under the chest, tail and the opening that the o-ringed lid seats against. The ears and cavity printed just fine without supports for me, but use what you need for your printer to print overhangs.
Category: Hobby