Computa Pranksta Mouse Jiggler Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple 2-piece case for a USB mouse jiggler called "Computa Pranksta" sold on Amazon by eRCaGuy.…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a simple 2-piece case for a USB mouse jiggler called "Computa Pranksta" sold on Amazon by eRCaGuy.
https://www.amazon.com/Programmable-Jiggler-50-Settings-Makes-Hacked-Randomly-Gibberish/dp/B06ZYZ2GTB
The "Computa Pranksta" is a little microcontroller board that plugs into your computer, appears as mouse/keyboard combo and is able to send limited mouse and keyboard output.
I use it to keep my computer awake, although you can also program it to type messages on someone's PC as a mild sort of computer prank (hence the name). Hours of hilarious fun, no doubt!
It doesn't come with a case, so if you have a 3D printer and some glue, here you go.
Print with the finest settings your printer allows and be careful to keep any epoxy or glue away from the USB contacts.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
100%
Filament: Any PLA, ABS, PETG, Any Any
Notes:
I printed it with PLA and sliced on Cura with 0.1mm layers.. you could probably get away with a coarser setting, but the thing is so small that even on that setting, it didn't take long to print.
Gluing
I glued the case together with superglue and moistened the surfaces with a homemade accelerator (1/2 teaspoon of baking soda in a cup of distilled water) before appling superglue.
Epoxy would've been better, but I was impatient.Make sure and keep any glue away from the USB contacts.
Category: Computer