Laguna Bandsaw Insert 18 HD (or others)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Laguna Bandsaw insert for the larger home or small commercial machines, I had lots of issues trying to find…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Laguna Bandsaw insert for the larger home or small commercial machines, I had lots of issues trying to find a replacement so I just made one. It is not an exact match and will require some slight fitting (corners are not tapered). You want a tight rather than drop in.
The design is a solid block (w 25% infill) rather than the open type that came with your machine. The holes are for dust collection as on the original.
Print Settings
Printer:
Ender 3 V2
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
25% Bicubic
Filament:
SUNLU PETG, ABS, ASA, PLA
Black
Notes:
Additional walls (5 or 6 total) For sanding to fit and as the insert is cut away it does not become hollow where dust can accumulate.
At least 5 top and bottom layersPost-Printing
Sand or file to fit
How I Designed This
Category: Parts