Face Shield By Prusa Modified for Magnifying Glasses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is one of the face shield models (rc3), that PRUSA published on its webpage. I printed plenty of them and gave to…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is one of the face shield models (rc3), that PRUSA published on its webpage. I printed plenty of them and gave to the retirement homes, AVIS and the Protezione Civile that distributed them in the hospitals too.
The original files can be also found here: https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc2/files
My version uses A4 size PVC sheets.
Here I have uploaded a modified version with more space between the face and the shield: this is expecially ueful for those healthcare professionals who wear magnifying lenses mounted over the glasses.
Please be sure to work in a clean environment, with the right care (gloves and mask) if you decide to print these PPE: you may be asymptomatic and your prints may become a medium for contagion instead of help. Contact your local hospitals and health organizations before printing these protection devices.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2 0.25
Infill:
20%
Filament:
Various brands PLA or PETG
Notes:
The resolution of the frontal part can be low, but I suggest to print the chin part with 0.2 resolution for easier insertion.
The transparent sheets are PVC sheets ranging from 180 to 200 microns.The elastic bands can be found on Amazon, measuring about 2 to 3 cm in height and 30 cm in length.
Category: 3D Printing