Flag Pole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add a "Flag Pole Holder-2.stl" with water drain hole and "Flag Holder-4" made Longer so it will work better... Add a…
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 155
- Wydruki
- 2
- Wyświetlenia
- 1343
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
UPDATE: To My Flag Pole. Change my flag holders to be used with
“fiberglass marking stakes” which they are ¼" Dia. (About 6.5mm). They are Glue to the holders. I used hot glue so if I need it I can remove easy. Or you can find something else.
What it makes that when is windy the stakes can rotate both holders together. With out them so many times ends of the flag are getting twisted.
I included a spacer that goes inside the rivets of the flag so it will prevent bending brackets when tightening the screws.
There are STL and Step File included.
Flag Pole made from 3/4 (26.75mm) PVC Pipe. Included are pictures for Information on mounting and put it together.
Print Settings
Printer:
JGAurora A5S
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
50
Filament:
Generic ABS
Black
Category: Decor